Modine Authorized Regional Distributor: Engineering & Design Support

ChopAir is a verified, nationally authorized distributor for Modine unit heaters and convection heating equipment. We deliver expert application engineering, submittal coordination, and installation planning for commercial unit heaters, industrial forced-air systems, and electric heating retrofits across the USA. Our mechanical engineering team provides factory-direct Modine pricing, equipment selection support, airflow analysis, and nationwide expedited fulfillment for building heating upgrades and electrification conversion projects.

Shop Modine Now

(816) 643-3875

Call for assistance with your HVAC project.

Verified Modine Dealer

Nationwide Distribution

Local Design Assistance

National Design & Engineering Support for Modine products

Our mechanical systems engineering team connects Modine’s unit heater technology with commercial and light industrial building requirements. We specialize in equipment sizing for forced-air applications, ductwork interface planning, electrical load calculations for electric unit heaters, and compliance documentation for building mechanical codes including IMC and IECC standards. Our technical library includes unit heater selection data and field application insights below. Access complete specification sheets, installation manuals, and performance curves on individual product listings at shop.chopair.com.

(816) 643-3875

Call now for nationwide service.

Modine National Logistics & Technical support

Maintaining Tier-1 Modine distributor status requires ChopAir to operate an efficient distribution network that expedites delivery of commercial unit heaters and minimizes freight expenses for building mechanical equipment.

Midwest Hub (Kansas City, MO)

Central warehousing facility supporting 2-3 day ground shipment to either coast.

Southwest Hub (Houston, TX)

Regional inventory serving Gulf Coast commercial construction and light industrial projects.

Southeast Hub (Apopka, FL)

Distribution center focused on hospitality construction and commercial building retrofit markets.

National Engineering & Design Desk

Our mechanical systems engineering group offers nationwide unit heater application support.

Unit Heater Sizing & Layout: Forward building floor plans and heating load calculations; we recommend appropriate unit heater models, determine mounting locations, and provide airflow pattern analysis for uniform temperature distribution.

Mechanical Submittal Preparation: Our team generates complete equipment submittals including performance data, dimensional drawings, and utility connection requirements necessary for contractor bidding and building department approval.

Industrial Freight & Job Site Delivery

Unlike standard HVAC wholesalers, ChopAir coordinates specialized LTL freight for suspended unit heaters and manages delivery logistics to match construction project schedules.

Construction Site Logistics: We arrange timed deliveries aligned with mechanical contractor installation windows and provide rigging assistance coordination for overhead unit heater placement.

Modine equipment ships with reinforced corner protection and secured mounting to prevent cabinet damage and ensure fan assemblies arrive installation-ready.

Modine Unit Heater Product Lines

Modine Electric Infrared Unit Heater

Modine Electric Infrared Unit Heaters combine radiant elements with forced convection for commercial and light industrial buildings. Electric design eliminates combustion requirements, venting, and gas piping—ideal for warehouse offices and renovation projects. Immediate startup delivers warmth within seconds without air quality concerns.

Modine Electric Infrared Unit Heater

Shop Now

Modine Residential Electric Unit Heater

Modine Residential Electric Unit Heaters serve garage workshops and storage buildings requiring supplemental comfort heating. These compact heaters feature quiet operation and residential voltage sizing (120V or 240V). Wall or ceiling mounting accommodates garage constraints while built-in thermal protection ensures safety.

Modine Residential Electric Unit Heater

Shop Now

Modine High-Output Electric Infrared Heater

Modine High-Output Electric Infrared Heaters provide commercial-grade medium-wave infrared for warehouse and industrial environments. High-wattage units project concentrated energy for spot heating in high-ceiling facilities and loading docks. All-electric operation supports LEED certification and building electrification while providing maintenance-free heating.

Modine High-Output Electric Infrared Heater

Shop Now

Modine Gas-Fired, High Intensity Infrared Heater

Shop Now

Modine Power Vented Gas-Fired Unit Heaters

Shop Now

National Engineering Guide: Modine Heater Model Comparison

Electric Unit Heaters vs. Gas-Fired Unit Heaters

The foundational heating equipment decision involves selecting between all-electric systems and natural gas or LP-fired alternatives, each offering specific advantages for different building scenarios.

Shop Modine
FeatureElectric Unit HeatersGas-Fired Unit Heaters
Power SourceElectric (208V-480V)Natural Gas or LP
InstallationNo venting required; electrical only.Requires gas piping and venting system.
Best ApplicationClean environments, retrofit projects.Large volume spaces, new construction.
Operating CostHigher energy cost per BTU.Lower energy cost in most regions.

ChopAir Engineering Field Insight: The Infrastructure Decision

"Electric unit heaters excel in renovation environments where natural gas infrastructure is absent or prohibitively expensive to install. For new construction projects with substantial heating loads, gas-fired equipment typically delivers superior lifecycle economics through lower fuel operating costs, however electric equipment provides simplified installation and supports zero-emission building requirements."

Get Project Assistance >

(816) 643-3875

Call for assistance with your HVAC project.

Infrared Radiant vs. Forced Air Convection

Understanding heat transfer methodology is fundamental to selecting appropriate equipment for specific building heating challenges and operational patterns.

Shop Modine
TechnologyInfrared RadiantForced Air Convection
Heat TransferDirect radiant energy to objects/surfaces.Heated air circulation via fan.
EfficiencyHigher in high-ceiling or drafty spaces.Better for enclosed, standard-height areas.
Comfort DeliveryImmediate warmth without air movement.Requires air circulation time.

ChopAir Engineering Field Insight: The Height Factor

"In warehouse facilities with ceiling heights exceeding 20 feet, infrared radiant technology delivers markedly better efficiency by directly warming floor surfaces and inventory rather than heating stratified ceiling air. Forced-air unit heaters perform optimally in conventional commercial spaces where rapid air temperature change takes priority over radiant comfort."

Get Project Assistance >

(816) 643-3875

Call for assistance with your HVAC project.

Power Vented vs. Separated Combustion Systems

Natural gas unit heaters utilize distinct venting and combustion air strategies that significantly impact installation complexity and thermal performance.

Shop Modine
System TypePower VentedSeparated Combustion
Combustion AirDrawn from conditioned space.Drawn from outside via dedicated pipe.
EfficiencyStandard efficiency (80-83%).Higher efficiency (up to 95%).
Makeup AirRequires building makeup air system.Self-contained combustion air supply.

ChopAir Engineering Field Insight: The Tight Building Envelope

"Contemporary commercial buildings with tight construction and limited infiltration benefit substantially from separated combustion units. Although power vented equipment costs less initially, separated combustion eliminates costly makeup air equipment requirements and achieves superior seasonal efficiency ratings through sealed combustion operation."

Get Project Assistance >

(816) 643-3875

Call for assistance with your HVAC project.

Which Modine heater model is best?

Consult the selection matrix below for preliminary equipment identification. For comprehensive performance specifications and application-specific recommendations, explore our detailed Product Comparison tools on ChopShop, or engage ChopBot for personalized technical consultation.

Use CaseRecommended Modine Category / ModelKey Technical Benefit
Retrofit Projects Without GasElectric Infrared Unit HeaterNo venting required; simple electrical installation.
Residential Garages/WorkshopsResidential Electric Unit HeaterCompact, quiet operation for smaller spaces.
High-Ceiling Loading DocksHigh-Output Electric InfraredConcentrated radiant heat for spot heating applications.
Large Volume WarehousesGas-Fired High Intensity InfraredMaximum BTU output for extensive coverage.
Standard Commercial SpacesPower Vented Gas-Fired Unit HeatersCost-effective forced air heating with proven reliability.
Tight Building EnvelopesSeparated Combustion Gas UnitsNo makeup air required; higher efficiency ratings.
Zero Emission RequirementsElectric Unit Heaters (All Types)LEED compliant with no combustion byproducts.
Low-Intensity Tube ApplicationsIPT Low-Intensity Gas-FiredUniform radiant coverage for general warehouse heating.

Meet the ChopBot

The Industry’s First AI-Powered Procurement Assistant

  • Run analysis on multiple model specs at once
  • Get fast advice on which models match your energy limitations
  • Put together quotes and projects instantly
Start Shopping HVAC Equipment

Shop Modine HVAC Today

ChopAir's all-inclusive buying platform includes expert human review for every order.

View Products

(816) 643-3875

Call for assistance with your HVAC project.

Now Live! The ChopShop - Your Easy Mechanical Contractor Buying Portal. →

X